15
AXIS 213 - Using the PTZ Network Camera
Live View
The following provides an overview of each button on the Live View page. If the AXIS
213 has been customized, the buttons will be displayed accordingly:
To resize the displayed image, click the View Size buttons:
half-size (x1/2), full-size (x1), x2 or x4. This will not change the
resolution of the image (not available in Sequence Mode).
The Output buttons control an output directly from the Live View page.
These buttons are configured under Setup | Live View Config | Layout.
Pulse - click this button to activate the port for a defined period of time,
e.g. to switch on a light for 20 seconds.
Active/Inactive - click these buttons to manually start and stop a
connected device, e.g. switch a light on/off.
These buttons start/stop the Sequence Mode. This mode is created in
Setup | Live View Config | Sequence mode and automatically displays
the view from preset positions at set intervals.
The Action buttons trigger an action directly from the Live View page.
These buttons are configured under Setup | Live View Config | Layout.
Click these buttons to manually start and stop events.
Use the Snapshot button to capture a snapshot of the image currently
being displayed in the window. Right-click on the image to save it in
JPEG format on your computer.
The AMC viewer toolbar is available in Microsoft Internet Explorer only. See AXIS
Media Control (AMC), on page 9 for more information. The AMC viewer toolbar
displays the following buttons:
The Play/Stop buttons start and stop the live video stream.
The Snapshot button takes a snapshot of the currently displayed image. The
Snapshot function and the target directory for saving snapshots can be
configured from AMC (AXIS Media Control), which is available from the
Windows Control Panel (Internet Explorer only).
Click the View Full Screen button and the video image will fill the entire
screen area. No other windows will be visible. Press Esc (Escape) on the
computer keyboard to cancel full screen view.