Axis Communications 213 PTZ user manual Manual Installation using ARP and Ping in UNIX/Linux

12

Manual Installation using ARP and Ping in UNIX/Linux

Assign your product with a unique IP address from a computer on your network, as follows:

1.Acquire an unused IP address for the AXIS 213 from your network administrator.

2.Connect a standard network cable to your AXIS 213 and connect it to the network.

3.Locate the serial number/MAC Address (S/N) found on the label on the AXIS 213.

Syntax:

arp -s <IP Address> <MAC Address> temp ping -s 408 <IP address>

Example:

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125

4.Connect the power to the AXIS 213.

5.Close the ARP Ping session once ‘Reply from 192.168.0.125: ...’ (or similar) is displayed (approximately 10-15 seconds).

6.Start a Web browser and enter the IP address in the Address/Location field.

7.Press Enter.

8.Enter a password for the root user (administrator).

9.The installation is now complete, proceed to Using the PTZ Network Camera, on page 14.