Axis Communications user manual Axis 213 PTZ Network Camera

6

AXIS 213 PTZ Network Camera

1IR Light - infrared light for night vision. Activated from the AXIS 213 web page.

2Network Indicator - the multi-colored network indicator flashes as follows:

•Amber - flashes for activity on a 10 Mbit/s network

•Green - flashes for activity on a 100 Mbit/s network

•Red - flashes rapid red for hardware error

•None - no connection

3 4 5

1

2

3Network Connector - The AXIS 213 connects to the network via a standard RJ45 connector. Supporting NWAY, the AXIS 213 detects the speed of the local network segment (10BaseT/100BaseTX Ethernet).

4Output/Input Connector - For connection of the connection module cable. See below for information.

5Power Connector - For connection of the PS-K power adaptor (included).

The Reset Button is located on the underside of the unit. This button is used to restore the factory default settings, as described in Resetting to Factory Default Settings, on page 42 or to install the AXIS 213 using AXIS Internet Dynamic DNS Service, on page 13.

The Serial Number is located on the label on the underside of the unit.