Random Access Adjustment Mode
Seagull correction
Use this correction only if, after adjusting the vertical lines with the side bow or side keystone, still a 'S' deformation is visible on the left and the right side of the image.
The default value on the bar scale for this correction is 50.
Push the control disk up or down to highlight SEAGULL CORREC- TION on the
Eliminate the deformation by pushing the control disk to the left or to the right until a straight line is obtained.
GEOMETRY |
| |
H PHASE |
| |
RASTER SHIFT |
| |
| ||
LEFT SIDE CORRECTION |
| |
| ||
H SIZE |
|
|
V LINEARITY |
| |
V SIZE |
|
|
BLANKING |
| |
Select with | or |
|
then <ENTER> |
| |
<EXIT> | ||
| ||
| V CENTERLINE BOW | |
| V CENTERLINE SKEW | |
| SIDE BOW | |
| SIDE KEYSTONE | |
| SEAGULL CORRECTION | |
| Select with | or |
| then <ENTER> | |
| <EXIT> to | return. |
Left Side Correction
Left side corrections affect only the vertical lines of the set up pattern. Only the green image is displayed while making the left side adjust- ments. The red and blue images will automatically be corrected in the same manner.
Convergence corrections are automatically disabled for the duration of these adjustments.
Look only to the left side of the image while adjusting these fine tunings (bow and keystone). Before starting the left side correction, insure that the side bow and keystone adjustments are done prior to these fine adjustments !
The following adjustments can be executed :
-Left keystone
-Left bow
Push the control disk up or down to highlight LEFT SIDE CORREC- TION on the geometry menu and then press ENTER.
ENTER will select the Left Side Correction menu.
EXIT will return to the random access adjustment menu.
ADJUST returns to operational mode.
All adjustments are indicated on the screen with the function name, a bar scale and a number between 0 and 100.
Adjust the next alignments until the vertical lines on the left side are straight.
LEFT SIDE CORRECTION
LEFT KEYSTONE
LEFT BOW
Ensure that the side bow and keystone adjustments are done prior to these fine adjustments
!
Select with | or |
then <ENTER> <EXIT> to return.
To enter an alignment, push the control disk up or down to highlight a function and press ENTER to activate this function.
Press EXIT to return.
5975688 BARCOVISION 1609S 131097
GEOMETRY
H PHASE
RASTER SHIFT
LEFT SIDE CORRECTION
H SIZE
V LINEARITY
V SIZE
BLANKING
then <ENTER>
<EXIT> | LEFT SIDE CORRECTION | ||
| |||
| LEFT KEYSTONE | ||
|
| LEFT BOW |
|
| Ensure that the side bow and | ||
| keystone | adjustments | are done |
| prior to | these fine adjustments | |
|
| ! |
|
| Select with | or | |
| then <ENTER> | ||
| <EXIT> to return. | ||
Correct the keystone geometry distortion of the vertical lines
Correct the bow geometry distortion of the vertical lines
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Correct by |
| pushing | Correct by |
| pushing | ||||||||||||||||||||
|
| ||||||||||||||||||||||||
the control disk to the | the control disk to the | ||||||||||||||||||||||||
right | left | ||||||||||||||||||||||||
