Random Access Adjustment Mode
Vertical corners
Highlight 'Vertical corners' and press ENTER to start the adjustment. To make a coarse adjustment of the red or blue horizontal lines in zone 10, 14, 18 and 22 simultaneously.
Hint :
-Adjust until the red or the blue horizontal lines are on the green lines or as close as possible to the green lines.
-During these adjustments, the horizontal convergence adjustments in zones 10 to 25 will be set to midposition (barscale 50).
Fine Convergence Adjustment.
Use these controls after coarse convergence adjustment to optimize the convergence of the red and blue image on the green image.
Use the control disk to make horizontal or vertical convergence adjustments in the selected zone and then press ENTER to move the box to another zone or EXIT to return to the Convergence menu.
ENTER toggles arrow keys between zone selection and zone adjustment .
EXIT returns to convergence menu.
Note : The green convergence adjustments can be added as an option. When these are available, always start with 'green only'. This option will also be indicated on the convergence menu.
Highlight first 'Green only' when available with the control disk and press ENTER to display the convergence adjustment menu. Continue with red on green and blue on green.
COARSE CONVERGENCE
HORIZONTAL SIDES
VERTICAL CORNERS
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
CONVERGENCE
COARSE ADJUSTMENT
RED ON GREEN
BLUE ON GREEN
FINE ADJUSTMENT
GREEN ONLY
RED ON GREEN
BLUE ON GREEN
CONVERGENCE |
SEL : select area |
using |
arrow keys |
ADJ : adjust area |
using |
arrow keys |
Toggle between SEL and ADJ with <ENTER> <ENTER> continue <EXIT> to return
CONVERGE
ADJUSTMENT
70
green image
red image
5975688 BARCOVISION 1609S 131097 |
| |
|
