Barco R9002240, R9002249 Connecting a RGB Analog source to port 4/5, RED Green Blue

Connections

Connecting a RGB Analog source to port 3.

Connect your RGB source via an interface to Port 3.

Always use an interface when a computer and local monitor have to be connected to the projector.

Barco interfaces which can be applied :

Universal analog interface		R9826100
RGB 120 MHz analog interface		R9826570
VGA interface	120V	R9828079
	230V	R9828070
MAC interface	120V	R9828059
	230V	R9828050
MAGIK interface 120V		R9828129 & R9828128
	230V	R9828120 & R9828121

RGB analog input with automatic sync detection. (Separate H and V sync inputs, with composite sync input or with sync signals on green)

Pin configuration D9 connector of the Analog input. 1 not connected

2 ground RGBS

3RED

4	GREEN
5	BLUE	361
6	ground RGBS

7ground RGBS

8 Hor/comp. sync

9 Vert. sync

Analog Input Selection :

with the RCU or build in RCU, press digit button 3.

Connecting a RGB Analog source to port 4/5.

RGB analog input terminals with separate H and V sync inputs, with composite sync input or with sync signals on green (automatic sync detection).

Always use an interface when a computer and local monitor have to be connected to the projector. See 'Connecting a RGB Analog source to port 3' for a list of BARCO interfaces which can be applied.

RGB input selection :

(RGB : R, G, B signals with automatic sync detection)

with the RCU or the build in RCU : press digit button 4 or 5

3-4 5975688 BARCOVISION 1609S 131097