5-2 5975688 BARCOVISION 1609S 131097
Start Up of the Adjustment Mode
enter
password
xxxx
Some items in the Adjustment mode are password protected. While selecting such
an item, the projector asks you to enter your password. (Password protection is
only available when the password DIP switch on the controller module is in the ON
position. Contact a BARCO authorized technician when no password is requested
during the adjustment procedure and password protection is desired.)
Your password contains 4 digits.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' appears on the screen under the displayed text 'enter
password'.
When your password is correct, you get access to the 'Adjustment item'.
When the entered password is wrong, The message 'Wrong password !!!' will be
displayed. The projector stays on the previous selected item.
Factory programmed password :
0000
Once the password is correctly entered, all other password protected items are
accessible without re-entering your password.
When re-entering the Adjustment mode, it will be necessary to enter your password
again when selecting a password protected item.
wrong
password
!!!