Service Mode
7SERVICE MODE
Starting up the Service mode.
Use the control disk to highlight 'Service' and then press ENTER.
Some items in the Service mode are password protected (when the password function is active). Enter your password to continue. All other password protected items are now also free available if you stay in the adjustment mode.
ENTER continues to the Service Mode main menu. EXIT returns to the Operational mode.
The service items are combined in two service menus. To switch from the first to the second menu or vice versa, push the control disk up or down to select 'more...'
Overview flowchart 'Service' mode.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
source 1 |
|
SERVICE MODE | |
IDENTIFICATION | |
COPY A BLOCK | |
DELTE A BLOCK | |
DELETE ALL BLOCKS | |
CHANGE PASSWORD | |
CHANGE LANGUAGE | |
RUN TIME | |
SET TO MIDPOSITION | |
CONVERGENCE MID | |
DYNAMIC ASTIGMATISM | |
MORE... | |
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
SERVICE MODE | |
G2 ADJUSTMENT | |
GAMMA CORRECTIONS | |
CRT RUN IN CYCLE | |
PROJECTOR WARM UP | |
CRT DRIVE MODE | |
MORE... | |
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
SERVICEMODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUNTIME
G2ADJUSTMENT
GAMMACORRECTIONS
CRT RUN IN CYCLE
PROJECTORWARMUP
CRTDRIVEMODE
5975688 BARCOVISION 1609s 131097 |
| |
|
