RackSwitch G8000 Application Guide

Example 2

Use this configuration to block traffic from a network destined for a specific host address. All traffic that ingresses port 10 with source IP from the class 100.10.1.0/24 and destination IP 200.20.2.2 is denied.

1.Configure an Access Control List.

RS G8000

(config)# access-list ip standard 2

RS

G8000

(config-std-nacl)# deny

100.10.1.0 255.255.255.0

RS

G8000

host

200.20.2.2

(config-std-nacl)# exit

 

2.Assign the ACL to port 10.

RS G8000

(config)# interface port 10

RS

G8000

(config-if)#

ip access-group 2 in

RS

G8000

(config-if)#

exit

BMD00041, November 2008

Chapter 6: Quality of Service „ 101

Page 101
Image 101
Blade ICE G8000 manual 100.10.1.0