DINION capture 5000 IP

Configuration en 33

 

 

4Configuration

Configuration of the DINION capture 5000 IP is carried out remotely via the network using a web browser. However, the license plate camera also has a set-up menu in which basic installation settings can be accessed. To view this menu, connect a monitor to the composite video output of the camera (refer to Section 3.6 Connecting to a Coax Cable, page 27).

4.1Menu Navigation Keys

Five keys are used for navigating through menu system.

Use the up or down keys to scroll through a menu.

Use the left or right keys to move through options or to set parameters.

When in a menu, quickly double-press the menu/select key to restore the selected item to its factory default.

To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item.

Some menus automatically close after about two minutes; other menus have to be closed manually.

4.2Install Menu

When the Install menu is opened, the MAC address of the unit is shown. This is factory set and cannot be changed. The items in the menu include the Mode selection, the Lens Wizard submenu, the Network submenu, and the Defaults submenu. Note: License plate camera parameter set-up is done via the web browser interface.

Bosch Security Systems, Inc.

Installation Manual

1.0 2012.01

Page 33
Image 33
Bosch Appliances 5000 IP installation manual Configuration, Menu Navigation Keys, Install Menu