DINION capture 5000 IP Advanced Mode | en 115
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
SSL certificate
To work with an SSL connection, both sides of the connection
must have the appropriate certificates. Upload one or more
certificate files, one at a time, to the camera.
1. Enter the full path of the file to upload or click Browse to
locate the file.
2. Click Upload to start the file transfer.
Once all files have been successfully uploaded, the device must
be rebooted. In the address field of the browser, enter /reset
after the camera's IP address, for example:
192.168.0.10/reset
The new SSL certificate is valid.
Maintenance log
Download an internal maintenance log from the device to send
it to Customer Service for support purposes. Click Download
and select a storage location for the file.
Note:
Make sure that the HTTPS browser port is not set to Off and
TLS 1.0 support is activated for your browser.
8.9.2 Licenses
This window is for the activation of additional functions by
entering activation codes. An overview of installed licenses is
shown.
8.9.3 System Overview
This window is for information only and cannot be modified.
Keep this information at hand when seeking technical support.
Select the text on this page with a mouse and copy it so that it
can be pasted into an e-mail if required.