Bosch Appliances 5000 IP installation manual Privacy Masks, Audio, Jpeg stream

DINION capture 5000 IP Advanced Mode en 75

Note:

Deactivate the display of the video images if the performance of the computer is adversely affected by the decoding of the data stream.

JPEG stream

Set the parameters for the M-JPEG stream.

–Select the Max. frame rate in images per second (IPS).

–The Picture quality slider allows adjustment of the M-JPEG image quality from Low to High.

Note:

The JPEG resolution follows the highest resolution setting either in stream 1 or stream 2. For example, if stream 1 is 4CIF/ D1 and stream 2 is CIF, the JPEG resolution will be 4CIF/D1.

8.4.7Privacy Masks

Four privacy mask areas can be defined. The activated masked areas are filled with the selected pattern in live view.

1.Select the pattern to be used for all masks (Gray).

2.Check the box of the mask to activate.

3.Use the mouse to define the area for each of the masks.

8.4.8Audio

NOTICE!

Provisions for audio connectivity are not available in the DINION capture 5000 IP.

Select the microphone or line-in connector as the Audio input or switch it off. Adjust the Input volume with the slider. Switch the Audio output On or Off.

Select G.711 or L16 as the audio Recording format. The default value is G.711. Select L16 if you want better audio quality with higher sampling rates. This requires approximately eight times the G.711 bandwidth.

Bosch Security Systems, Inc. Installation Manual 1.0 2012.01