DINION capture 5000 IP Installing the DINION capture | en 21
Bosch Security Systems, Inc. Installation Manual | 1.0 | 2012.01
Figure 3.1 Recommended Vertical and Horizontal Mounting Angle
If the maximum range is exceeded, then the letters become
smaller and more difficult to read. At the maximum range and
angle the width of the number plate covers approximately 12%
of the width of the screen.
3.3 Mounting the DINION capture
For a secure mounting installation, bolts should extend through
the mounting surface and be secured with nuts, washers, and
lock washers on the opposite side. If studs are used, they
1 DINION capture
2 Capture Range
3 Vertical Mounting Angle
4 Horizontal Mounting Angle
NOTICE!
The Capture Range is the distance from the license plate
camera to the license plate. Working below the optimal capture
distance allows a larger area for number plates and more
accurate recognition but less lane area can be covered. If the
imager is too close to the license plate, the plate could
disappear from the field of view before it is captured.
CAUTION!
Installation should only be performed by a qualified service
professional in accordance with the National Electrical Code or
applicable local codes.