DINION capture 5000 IP

Advanced Mode en 67

 

 

8.4.3Shutter/AGC

Shutter

NOTICE!

Shutter and gain settings should be changed only by an experienced user. Changing the shutter speed affects maximum capture speed of the vehicle and ambient rejection ability. Shutter is fixed at 1/5000 from the factory for maximum performance.

Fixed — allows a user-defined shutter speed (recommended setting).

AES (auto-shutter) — the camera automatically sets the optimum shutter speed. The camera tries to maintain the selected default shutter speed as long as the light level of the scene permits.

Default shutter / Fixed shutter

Select the shutter speed (1/60 [1/50], 1/100, 1/120, 1/250, 1/ 500, 1/1000, 1/2000, 1/5000, 1/10K) for the default (AES) or fixed value.

In AES mode, the camera tries to maintain the selected shutter speed as long as the light level of the scene is high enough.

In Fixed mode, select the shutter speed.

If the optimal license plate image cannot be obtained by adjusting gain, increase the shutter speed to 1/10000 to darken the image, decrease the shutter speed to 1/2000 or more to brighten the image but reduce the maximum capture speed and ambient rejection ability.

Actual shutter

Displays the actual shutter value from the camera to help compare lighting levels and optimum shutter speed during set- up.

Sensitivity up

Selects the factor by which the sensitivity of the camera is increased (OFF, 2x, 3x, etc. to a maximum of 10x).

Bosch Security Systems, Inc.

Installation Manual

1.0 2012.01

Page 67
Image 67
Bosch Appliances 5000 IP installation manual Shutter/AGC, Default shutter / Fixed shutter, Actual shutter, Sensitivity up