MIC412TI and MIC412TF Camera Installation and Operation Manual

Zoom In and Zoom Out control the zoom position of the camera lens at a fixed rate.

Latch PTZ: This tickbox will Latch the PTZ controls for continuous tilt or rotation as required.

Iris Controls

Auto Iris lets the MIC automatically adjust to changing light levels, where Manual

Iris gives the user control with Open and Close buttons.

Focus Controls

Auto Focus lets the MIC automatically focus on a changing scene, where Manual

Focus gives the user control with Near and Far buttons.

EN 26

Auxiliaries

Slow Zoom: Reduces the speed at which the MIC zooms.

PTZ Scale: Scales the MIC speed dependant on zoom position.

Wiper: Turns on or off the MIC wiper if fitted.

Washer: Activates the washer relay on the MIC-WKT card or the MIC-ALM card if fitted in the PSU. This also moves the MIC to the stored WashWipe position and turns on the wiper. Once de-activated the MIC will return to its original position and turn off the wiper.

IR / Thermal: Dependant on the MIC this will do one of 3 things, for a Non-IR Standard MIC the IR cut filter will come in and the image will go black and white. For a twin IR MIC, the cut filter will come in and the lamps will turn on.

Note: If the lamps do not turn on, ensure the power supply is an IR version and that Auto Alarm and Multi Alarms in the MIC Setup tab are both turned on.

For a MIC412, the video output will switch from the Sony module to the thermal module; the controls on the Thermal tab will also now function.

Digital Zoom: This will enable the MIC to continue into the digital zoom once the optical limit has been reached. This also needs to have Digital Zoom Enabled under the MIC Setup tab.

Auto Pan: This will start the MIC panning between left and right defined limits.

On Screen Data: This activates the Sony modules on screen icons.

Preset Positions

Bosch Security Systems

Issue 8

Page 26
Image 26
Bosch Appliances MIC412 operation manual Iris Controls, Focus Controls, Auxiliaries, Preset Positions