MIC412TI and MIC412TF Camera | Installation and Operation Manual AAA EN | 23 Bosch Security Systems Issue 8
Commissioning the MIC412 through Universal Camset
Universal Camset is Windows PC based configuration software from Bosch
Security Systems; it is issued free on the CD that comes with each MIC camera.
Universal Camset supersedes all previous versions of Camset used.
Standard Controls
Universal Camset opens on the Standard Controls tab as shown above; the
highlighted area contains the Boot messaging, MIC settings and Camset Settings
controls.
Boot Messages
The large square text box in this area will display boot messages coming from the
MIC. One of the first lines contains the MIC address which is decoded and entered
into the Address line. The rest of the lines indicate the MIC model number, control
card serial number, MIC Software etc.
At the same time, a boot message is displayed on the video indicating similar
information, which may be helpful if return comms should fail or be incorrectly
connected.
MIC Settings
Current Address
This box indicates the address to which commands are sent from Camset. This
therefore needs to match the address of the MIC that needs to be controlled.
When the MIC is booted the first line of the messages it sends is the address,
which is read and put into this box automatically.