Bosch Power Tools 4310, 4410 manual Rear Carrying Handle Used for lifting of the tool

BM 2610012089 03-10 E:BM 2610012089 03-10 E 3/30/10 7:40 AM Page 9

36	38
		40
		35
42		34	37
			43
		24
39
6			23
30	33	31
			32
			31
29			44

22 46 19

27

45

31.Bevel Detent pin (Crown Molding Setting) – Allows you to easily lock the head assembly to the bevel angle of 33.9° to the left or right.

32.Bevel Scale – This scale is large and angled to allow you to easily read bevel angles.

33.Head Assembly lock pin – The saw is equipped with a lock pin used to lock the head assembly in the lower position for transporting.

34.Quick Release Depth Stop Button – Allows you to quickly release the depth stop.

35.Depth Stop fine Adjustment Knob–Allows you to adjust the depth of the blade for cutting grooves in the workpiece (Figure 13, page 17).

36.Handle Rotation Release lever (Model 4410 only) – Pulling this lever allows the handle to be rotated. Release the lever into one of four oper- ating positions.

37.Rear Carrying Handle – Used for lifting of the tool.

38.Handle Clamp (Model 4410 only) – Locks han- dle in the selected position.

39.Arbor lock—Allows the user to keep the blade from rotating while tightening or loosening arbor screw during blade replacement or removal.

40.front Carrying Handle – Used for lifting the tool.

41.lower Guard Actuation link – Allows for smooth movement of the lower guard.

42.Upper Blade Guard – Covers upper portion of the blade.

43.Dust Bag and Dust Elbow – Used to collect saw dust.

44.Sliding fence lock Knob – Used to hold fence position after slide adjustment.

45.Rear Cover Tool Storage – Storage for 10mm/17mm Combination Open End Wrench and 1.5mm & 3mm Hex “L” Wrenches.

46.Microfine Miter Adjustment System – Allows for fine adjustment (up to 2 degrees to the left or right) of the detent angles.

-9-