BM 2610012089
26
28
25
17 18 16
15 14
2
4 20 41
1 1 3
5
|
|
|
| 7 |
|
|
|
| 8 |
|
|
|
| 9 |
|
|
|
| 18 |
|
|
|
| 13 |
11 | 10 | 11 | 21 | 12 |
17.Sliding Base Extensions – These extensions provide extra workpiece support and are espe- cially useful when cutting long workpieces.
18.Base Extension Clamping levers – These levers lock the base extensions at the desired positions.
19.length Stop (Model 4410 only) – For repetitive cuts of the same length. Can be moved to left side, if desired.
20.Dust port – The dust port can accommodate the dust chute and dust bag or optional VAC004 Vacuum Hose Adapter, which accepts Bosch 35mm hoses.
21.Bevel lock lever – The
22.Bevel Range Selector Knob – Allows selection of the bevel range, 0° to 45° left, 0° to 45° right, and complete range of 47° left to 46° right.
23.Slide Rail lock Knob – The slide rail lock knob
locks the slide rails when you are not making slide cuts and when you are transporting the saw.
24.Slide Rails – Guide the head assembly when making slide cuts.
25.Clamp position Holes – There are two (2) holes (not shown) behind the fence for placing the clamp.
26.Quick Action Clamp (Model 4410 only) – Pro- vides fast clamping of workpiece.
27.Workpiece Clamp (Model 4310 only) – Pro- vides fast clamping of workpiece.
28.Cord Wrap – Allows you to easily wrap up the cord so it’s out of the way when transporting or storing.
29.Multi purpose Tool (Model 4410 only) – Used for loosening/tightening the blade and for fence adjustments.
30.Multi purpose “l” Wrench 6.5 mm (Model 4310 only) – Used for loosening/tightening the blade.
