Preset Shot Size ONE Shot | Breville BES830XL specification

PERFECTING YOUR SKILLS - "NON-PRESSURIZED" SINGLE WALL FILTERS

PROGRAMMING YOUR BREVILLE DIE-CAST PROGRAMMABLE ESPRESSO MACHINE

STEP 8 - PREPARING FOR EXTRACTION

NOTE:

PRESET SHOT SIZE - DOUBLE SHOT

PROGRAMMING SINGLE ESPRESSO

PROGRAMMING DOUBLE ESPRESSO

• Ensure all the button surrounds on the

control panel are illuminated, indicating

the machine has reached the correct

temperature for extraction, and is ready

for use.

• Ensure the drip tray and portaﬁ lter are

in place.

• Place one or two pre-warmed cups

beneath the portaﬁ lter outlet.

PRESET SHOT SIZE - ONE SHOT

Press the one cup button once. A preset extraction of approximately 1 oz of espresso will be delivered. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered.

When using a single shot ﬁlter, for optimal ﬂavor, you should only extract approximately 1 oz. When using a double shot ﬁlter, for optimal ﬂavor, you should only extract approximately 2 oz.

NOTE:

The amount of espresso extracted in the cup will vary depending on the coarseness of your grind and grind amount.

Press the two cup button once. A preset extraction of approximately 2oz of espresso will be delivered. A pumping noise will be heard in this operation. The machine will automatically stop once the preset pour has been delivered.

NOTE:

The minimum pour for one cup and

two cups is set at ½ oz (15ml).

NOTE:

Pressing the one cup or two cup

buttons during a programmed espresso will immediately stop the pour.

Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to pour your preferred shot size.

1.Prepare to make a single cup of espresso by following steps 1 to 7 in ‘PERFECTING YOUR SKILLS - Single Wall Filters’, pages 20-22.

2.Place your cup underneath the group head.

3.To begin programming, press the ‘PROGRAM’ button once. The machine will beep once and the program button will begin to ﬂ ash. This indicates the machine is in programming mode.

4.Press the one cup button once. The machine will commence normal pour function, and the one cup button surround will begin to ﬂ ash.

5.When the desired amount of espresso has poured into the cup, press the one cup button to stop the pour. The machine will beep twice, indicating it has saved your preferred pour quantity and exited programming mode.

Programming over-rides the preset shot sizes (1oz or 2oz), re-programming the button to pour your preferred shot size.

1.Prepare to make a double cup of espresso by following steps 1 to 7 in ‘PERFECTING YOUR SKILLS - Single Wall Filters’, pages 20-22.

2.Place your cup underneath the group head.

3.To begin programming, press the ‘PROGRAM’ button once. The machine will beep once and the program button will begin to ﬂ ash. This indicates the machine is in programming mode.