Breville BES830XL manual New photo of machine showing water tank being removed, Step

ASSEMBLING YOUR BREVILLE DIE-CAST PROGRAMMABLE ESPRESSO MACHINE

STEP 1 STEP 2 STEP 3

New photo of machine showing water tank being removed

Insert the storage tray into the base of the machine and slide towards the back wall. The storage tray conveniently stores the cleaning tool, stainless steel fi lters and measuring/tamping spoon when not in use, so they are not misplaced.

Insert the ‘Empty Me!’ full indicator into position in the drip tray and place the stainless steel grid on top. Slide the drip tray into position in the base of the machine in front of the storage tray.

Slide the water tank over the drip tray
and into the front opening of the machine
and into position above the storage tray.
Ensure the water tank aligns fl ush with the	Operating
sides of the machine.
complete a water flushing operation,
NOTE:
Before each use it is recommended to
without ground coffee, to ensure that
all internal piping has been preheated.
Refer to Steps 1 to 6 in ‘One-Time
Priming’, page 14

12

BES830XL_IB_Issue1,09.indd 12-13

13

4/1/10 11:02:41 AM