120 Brocade Adapters Administrator’s Guide
53-1001256-01
Port POM Properties panel (HBA and CNA)
A
Port POM Properties panel (HBA and CNA)The Port POM Properties panel enables you to monitor the SFP attributes. A notification is given for
any parameters that are not within the configured power, temperature, voltage, and current
specification policy.
NOTE
Only Brocade-branded SFPs are supported with the 8 Gbps FC HBAs and 10 Gbps CNAs.
The 4 Gbps SFP (bundled with the Brocade 415 or 425) is referred to as “SFP,” the 8 Gbps SFP
(bundled with the Brocade 815 or 825), is referred to as “SFP+,” and the 10 Gbps SFP (bundled with
the BR-1010 a nd BR-1020 ) is refer red to as “ XFP.”
Opening the properties panel
1. Select a port in the device tree.
2. Click the POM tab in the right pane.
Fields and components
Field Description
Temperature(C) The port temperature, measured in Celsius.
Bias Current (mA) The low-level DC current (the Bias Current), measured in mA.
Tx Power (mW) The transmitted power, measured in mW.
Rx Power (mW) The received power, measured in mW.
Voltage The voltage; for example, 1.8V, 3.3V, or 5.0V.