Brocade Adapters Administrator’s Guide 63
53-1001256-01
Fibre Channel diagnostics using the GUI 6
Fibre Channel diagnostics using the GUI
The purpose of diagnostic commands is to evaluate the integrity of t he system hardware. B e sure to
disable the port(s) before running any type of port diagnostics. In addition, it is advisable that you
do not perform other operations on the adapter while running HCM or BCU diagnostics.
NOTE
When you invoke a test on an adapter, you can run diagnostics for one or both ports within the
selected adapter.

Running a hardware-level test using the GUI

1. Select an adapter or port from the device tree.
2. Select Configure > Diagnostics from the main menu.
OR
Right-click the component and select Diagnostics from the list
The Diagnostics dialog box is displayed.
FIGURE 25 Diagnostics - Port Tests dialog box