134 Brocade Adapters Administrator’s Guide
53-1001256-01
Test Log Details dialog box (HBA and CNA)
A
Test Log Details dialog box (HBA and CNA)The Test Log Details dialog box enables you to view details about a selected port or protocol test.
Opening the dialog box
1. Select Configure > Diagnostics from the Host Connectivity Manager.
2. Run any diagnostic test.
3. Select and double-click a row of the test results in the bottom pane.
Fields and components
Using the dialog box
Refer to the following topics for specific procedures using this dialog box:
•“Running a hardware-level test using the GUI”
•“Running a Fibre Channel protocol-level test using the GUI”
Field Description
Time The date and time the test was run.
Test The name of the test.
Status The status of the test, for example, executing or pending.
Configuration The name of the test component and its corresponding value. For
example:
•Adapter world wide name
•Data pattern
•Frame count
•Port world wide name
Result The test result, for example, test started or test complete.