Brocade Communications Systems Configuring security authentication using the GUI (Host and HBA)

22 Brocade Adapters Administrator’s Guide
53-1001256-01
Host security authentication
4
Configuring security authentication using the GUI (Host and HBA)
You can access the Fibre Channel Security Protocol Configuration dialog box by selecting the Host,
an HBA, or an HBA port from the device tree.
NOTE
FC-SP is not available for Solaris platforms.
1. Select the appropriate device based on how you want to configure security authentication:
•From the host level, select the host from the device tree.
•From the HBA level, select the adapter from the device tree.
•From an HBA port, select a port from the device tree.
2. Select Configure > FC-SP from the main menu, or perform the appropriate following step to
open the security authentication dialog box:
•From the host level, right-click the host and select FC-SP from the list.
The Fibre Channel Security Protocol Configuration (host level) dialog box displays, as
shown in Figure6.
•From the adapter level, right-click the adapter and select FC-SP from the list.
The Fibre Channel Security Protocol Configuration (adapter level) dialog box displays. This
dialog box is identical to the Fibre Channel Security Protocol Configuration (host level)
dialog box.
•From the adapter port level, right click a port and select FC-SP > Authentication from the
list.
The Fibre Channel Security Protocol Configuration dialog at the host level displays.
FIGURE 6 Fibre Channel Security Protocol Configuration - host level dialog box