Brocade Adapters Administrator’s Guide 147
53-1001256-01
BCU commands B
Boot commands
boot over SAN commands apply to the 8 Gbps HBA only.
bcu boot --blunZone -c <cfg> -p <port_wwn> -r <rport_wwn> -l <lun_id | lun#>
--upload [adapter_id] <image_file> [-a]
Converged Enhanced Ethernet (CEE) commands
bcu cee --query <port_id>
--stats <port_id>
--statsclr <port_id>
Debug commands
bcu debug --portlog <port_id>
--portlogclear <port_id>
--portlogctl <port_id> <enable | disable>
Diagnostic commands
bcu diag --sfpshow <port_id>
--tempshow <ad_id>
--beacon <por t_id> {on | off} [<duration>]
--pciloopback <port_id> [-p <pattern>] [-c <frame_count>]
--loopback <port_id> [-t <loopback_type>] [-s <speed>]
[-c <frame_count>] [-p <pattern>]
--memtest <ad_id>
--queuetest <port_id>
Windows driver configuration commands
bcu drvconf --key <key_name>
--val <value>
Possible key_name and value ranges are:
•key = bfa_ioc_queue_depth, value range [>0] default = 2048
•key = bfa_lun_queue_depth, value range [>0] default = 32
•key = ioc_auto_recover, value range [0-1] default = 1
•key = rport_del_timeout, value range [>0] default = 90
•key = msix_disable, value range [0-1] default = 1
Ethernet diagnostic commands
bcu ethdiag --loopback <port_id> [-t <loopback-type>] [-c <frame_count>] [-p pattern]
Ethernet IOC commands
bcu ethioc --enable <port_id>
--disable <port_id>
--stats <port_id>
--statsclr <port_id>
--query <port_id>
Ethernet Log command