5.3.3 Parallel

Use this to configure the parallel interface.

ECP

Use this to configure the ECP communication mode of the parallel interface.

•Enabled (default)

The printer receives data in ECP mode.

•Disabled

The printer does not receive data in ECP mode.

5.3.4Report/List

Use this to print the various reports and lists.

✏Note

Reports and lists are printed on A4 or Letter paper. (The requested paper size depends on your country.) Set the A4 or Letter paper lengthwise into the paper tray.

Printer Settings

This is a list of the hardware installed and detailed configuration.

See

For an example of the printer configuration list, refer to 8.4.1 “Confirming Printer Configuration and Network Settings”.

Panel Settings

This is a detailed list of all the settings in the control panel menus.

PCL6 Font List

This is a list of the available PCL6 data fonts.

5-12