3.6Changing the Configuration for Options
Once you make the initial configuration of the printer, you must reconfigure the printer driver when you install the following options.
1.2 Tray Module
2.Hard disk
3.Memory expansion
2
1
3
See
For details about how to install options, refer to the literature provided with the options. In the following section, it is assumed that the options are already installed.
Memory expansionIn general, DIMM must have the following specifications:
Type: | 144pin and 64bit output | |
CAS Latency: | 100MHz or more | |
Capacity: | ||
Dram Type: | SDRAM 2 Bank |
|
The following DIMM size can be installed: | ||
<US> |
|
|
64 MB | TECHWORKS | |
128 MB | TECHWORKS | |
256 MB | TECHWORKS | |
<Europe> |
|
|
64 MB | Buffalo Technology | |
128 MB | Buffalo Technology | |
256 MB | Buffalo Technology | |
|
| |