✏Note
The IP address consists of four separate values (base 10) separated by decimal points. The 4 values can be set anywhere between 0 and 255.
Continued from the previous step | Example: |
| |
↓ | • IP Address ’192.168.1.100’ |
TCP/IP | • Subnet mask ’255.255.255.0’ |
• Gateway Address ‘192.168.1.254’ | |
Setup IP Address |
|
↓10. Press the <
> button once.
TCP/IP
IP Address
↓11. Press the <Form Feed/Set> or < 
> button once.
IP Address 000.000.000.000*
12. Using the <
> or <
> button, press the buttons until
↓the desired value (for example, 192) appears.You can hold down the buttons to change the value in increments of 10.
IP Address 192.000.000.000
↓13. Press the < 
> button once and move the cursor to the next value.
IP Address 192.000.000.000
↓14. Repeat steps 12 and 13 to finish setting the IP address.
IP Address 192.168.001.100
↓15. Press the <Form Feed/Set> button once.
Reboot system
To take effect
↓ | 3 seconds later, the following screen appears. | |
|
|
|
IP Address |
|
|
192.168.001.100* |
|
|
↓16. Press the <Job Cancel/Back> or < 
> button once. The lower line of the screen returns to ‘IP address’.