Log Print

This is a detailed list of the processed print jobs (maximum 22). Use this list to confirm that jobs were printed correctly.

See

For an example of the print log, refer to 8.4.2 “Confirming the Print Log”.

5.3.5 Network

Use this to make network settings.

Look

You cannot change this setting while the printer is processing print data.

You must restart the printer for settings to take effect. After configuring items, be sure to restart the printer.

Ethernet

Use this to set Ethernet communication speed and mode.

•Auto (default)

10Base-T Half, 10Base-T Full, 100Base-TX Half, or 100Base-TX Full is selected automatically.

•10Base/Half

•10Base/Full

•100Base/Half

•100Base/Full

TCP/IP

Use this to make TCP/IP settings. This menu contains the following:

•Setup IP Address

Select the how to obtain an IP address. Parameters are as follows: DHCP (default)

The IP address is obtained from a DHCP server on the network. Panel

Use this to set the IP address from the control panel.

5-13