IP Filter

Use this to block the reception of data from certain locations.

To block a particular IP address, specify the IP address in ‘FilterX Address’ (X is a number between 1 and 5) and the subnet mask in ‘FilterX Mask’ as numbers between 0 and 255. For the set address, select ‘OFF’ (default), ‘Reject’, or ‘Accept’ from ‘FilterX Mode’.

You can filter up to 5 addresses. Filter1 takes priority over the other filters. Therefore, when setting filters for a number of addresses, assign the addresses in ascending ranges from Filter1 to Filter5.

See

You can also set IP filter settings by connecting to the printer using a web browser or by using the BRAdmin Professional software. For a detailed examples of these settings, refer to the “Network Use's Guide” on the provided CD-ROM.

For more information about Web Based Management, refer to 8.5 “Confirming Printer Status from Your Computer”.

Init NVM

This resets the non-volatile memory of the network card (also known as a print server).

Look

You cannot change this setting while the printer is processing print data.

•YES

Resets the memory card's non-volatile memory. Resetting the NV memory restores the items of the ‘5 Network’ menu to their defaults.

Look

You must restart the printer for this setting to take effect. After configuring items, be sure to restart the printer.

•NO

Does not reset the NV memory and returns to the menu.

5-16