Continued from the previous step
↓
Starting protocols
Protocol
LPD
↓ | 6. Press the < > button once. |
Protocol
Port9100
↓ | 7. Press the < > button once. |
Protocol
IPP
↓ | 8. Press the < > button once. |
Protocol
NetBIOS TCP/IP
↓ | 9. Press the < > button once. |
Protocol
NetBEUI
↓ | 10. Press the < > button once. |
Protocol
NetWare
↓ | 11. Press the < > button once. |
Protocol
AppleTalk
1.Press the <Form Feed/Set> button once. XXX indicates the protocol name.
XXX
Disabled *
2. Press the < > button once.
XXX
Enabled
3.Press the <Form Feed/Set> button once. ‘Reboot system to take effect’ appears for 3 seconds, then following screen appears.
XXX
Enabled *
4.To start other protocols, press <Job Cancel/Back> or the < 
> button once and continue to the next step.
To finish the setting procedure, go to step 12.
↓
12. Restart the printer.