1.2Configuring the Printer on a Network
This section describes configuring the printer for a network connection.
1.2.1 Setting an IP Address
This section describes the procedure for setting the IP address, subnet mask, and gateway address from the control panel of the printer.
Follow the steps below.
Look
IP addresses are managed throughout the system as a whole. Specifying the wrong IP address can affect the entire network. Before setting an IP address, consult your system administrator.
See
Refer to 5.2 “Basic Menu Operation” for further information about the operation of the control panel.
Set the IP address acquisition method to ‘Panel’.Ready to Print | (The print screen. The printer is ready to print.) |
|
↓ | 1. | Press the <Menu> button. The menu screen appears. | |
|
|
|
|
Menu: |
|
| (The menu screen) |
1:System |
|
| |
|
|
| |
↓ | 2. | Press the < > button 4 times. | |
|
|
|
|
Menu: |
|
|
|
5:Network |
|
|
|
↓3. Press the <Form Feed/Set> or < 
> button once.
5:Network Ethernet
↓4. Press the < 
> button once.
5:Network
TCP/IP
↓5. Press the <Form Feed/Set> or < 
> button once.
Continued