
Chapter 12
Improving copy quality
You can choose from a range of quality settings. The default setting is Auto.
Auto
Auto is the recommended mode for ordinary printouts. Suitable for documents that contain both text and photographs.
Text
Suitable for documents containing only text.
Photo
Suitable for copying photographs.
To temporarily change the quality setting, follow the steps below:
a Make sure you are in Copy mode . b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Contrast/Quality. Press a or b to choose Quality.
Press OK.
e Press d or c to choose Auto, Text or
Photo. Press OK.
f Press Start.
To change the default setting, follow the steps below:
a Press Menu, 3, 1.
31.Quality
aText Photo
bAuto Select ab or OK
b Press a or b to choose the copy quality. Press OK.
c Press Stop/Exit.
Sorting copies using the ADF
You can sort multiple copies. Pages will be stacked in the order 1 2 3, 1 2 3, 1 2 3, and so on.
a Make sure you are in Copy mode . b Load your document in the ADF.
c Use the dial pad to enter the number of copies (up to 99).
d Press Sort.
e Press Start.
Changing text copy resolution
You can change the text copy resolution to 1200x600 dpi if you are using the scanner glass and have selected Text as the Contrast/Quality and an enlargement or reduction ratio of 100%. The default setting is
600 dpi.
a Make sure you are in Copy mode .
b Place your document on the scanner glass.
c Press Menu, 3, 2.
32.FB Txt Quality
a1200x600 dpi
b600dpi
Select ab or OK
d Press a or b to choose the text copy resolution.
Press OK.
e Press Stop/Exit.
84