Installing extra memory

a Turn off the machine’s power switch.

Unplug the telephone line cord.

b Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet.

Note

Be sure to turn off the machine’s power switch before you install or remove the SO-DIMM.

c Remove the SO-DIMM cover and interface access cover.

d Unpack the SO-DIMM and hold it by its edges.

IMPORTANT

To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface.

e Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).

1 2

f Put the interface access cover and the SO-DIMM cover back on.

g Plug the machine’s power cord back into

the AC power outlet first, and then connect the interface cable.

h Plug in the telephone line cord. Turn on the machine’s power switch.

Note

To make sure that you have installed the SO-DIMM properly, you can print the user settings page that shows the current memory size. (See How to print a report on page 80.)

116