Error Message

Cause

Action

Out of Memory

The machine’s memory is full.

Fax sending or copy operation in

 

 

progress

 

 

Do one of the following:

 

 

„ Press Start to send or copy the scanned

 

 

pages.

 

 

„ Press Stop/Exit and wait until the other

 

 

operations in progress finish, and then try

 

 

again.

 

 

„ Clear the data from the memory. (See

 

 

Out of memory message on page 47 or

 

 

page 90.)

 

 

Print operation in process

 

 

Do one of the following:

 

 

„ Reduce print resolution. (See Advanced

 

 

tab in the Software User’s Guide on the

 

 

CD-ROM.)

 

 

„ Clear the faxes from the memory. (See

 

 

Out of memory message on page 90.)

 

 

 

Print Unable XX

The machine has a mechanical

Disconnect the machine from the power for

 

problem.

several minutes, then reconnect it. (The

 

 

machine can be turned off for approximately

 

 

60 hours without losing faxes stored in the

 

 

memory. See Transferring your faxes or Fax

 

 

Journal report on page 139.)

 

 

 

Protected Device

The protect switch of the USB

Turn off the protect switch of the USB Flash

 

Flash memory drive is on.

memory drive.

 

 

 

Rename the File

There is already a file on the USB

Change the file name of the file on the USB

 

Flash memory drive with the

Flash memory drive or the file you are trying

 

same name as the file you are

to save.

 

trying to save.

 

 

 

 

Replace Parts

The drum unit is the end of its life.

Replace the drum unit.

Drum

 

(See Replacing the drum unit on page 158.)

 

 

 

 

The drum unit counter was not

1 Open the front cover, and then press

 

reset when a new drum was

Clear/Back.

 

installed.

2 Press 1 to reset.

 

 

 

 

 

Replace Parts

It is time to replace the fuser unit.

Call Brother Customer Service to replace the

Fuser Unit

 

fuser unit.

 

1-877-BROTHER (1-877-276-8437) (in U.S.A)

 

 

 

 

1-877-BROTHER (in Canada)

 

 

 

136