Turn off the machine’s power switch.
Close the front cover.

Packing and shipping the machine

CAUTION

If you pack the machine soon after turning off the power make sure the machine has cooled down completely.

When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, you could void your warranty. The machine should be adequately insured with the carrier.

a

b Unplug the machine from the telephone wall jack.

c Unplug all the cables and AC power cord from the machine.

d Push the Scanner Lock Lever down to lock the scanner. This lever is located on the left of the scanner glass.

Troubleshooting and routine maintenance

f Take out the drum unit and toner cartridge assembly. Leave the toner cartridge installed in the drum unit.

g Put the drum unit and toner cartridge assembly into a plastic bag and seal the

bag.C

h

i Put the styrofoam piece marked “FRONT” into the original carton (1). Pack the drum unit and toner cartridge assembly (2) and put it in as shown below (3). Wrap the machine in the plastic bag and put it in the original carton (4). Put the printed material behind the machine (5).

IMPORTANT

Damage caused to your machine by failure to lock the scanner before packing and shipping may void your warranty.

e Press the front cover release button and open the front cover.

163