Troubleshooting and routine maintenance

d Fan the paper stack, and then put it back

For Jam Tray 2:

in the MP tray.

 

e When loading paper in the MP tray, make sure that the paper stays under the maximum paper height guides on both sides of the tray.

C

b Use both hands to slowly pull out the jammed paper.

Paper is jammed in Paper Tray 1 or Tray 2

If the LCD shows Jam Tray 1 or Jam Tray 2, follow these steps:

a Pull the paper tray completely out of the machine.

For Jam Tray 1:

c Make sure the paper is below the maximum paper mark (b) of the paper tray. While pressing the blue paper- guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.

d Put the paper tray firmly back in the machine.

IMPORTANT

DO NOT take out the standard paper tray while paper is feeding from a lower paper tray as this will cause a paper jam.

143