Loading paper and documents

Recommended paper specifications

The following paper specifications are suitable for this machine.

Basis weight

20-24 lb (75-90 g/m2)

 

Thickness

80-110 m

2

 

 

Roughness

Higher than 20 sec.

 

 

 

 

Stiffness

90-150 cm3/100

 

Grain direction

Long grain

 

 

 

 

Volume resistivity

10e9-10e11ohm

 

Surface resistivity

10e9-10e12ohm-cm

 

Filler

CaCO3 (Neutral)

 

Ash content

Below 23 wt%

 

 

 

 

Brightness

Higher than 80%

 

 

 

 

Opacity

Higher than 85%

 

 

 

 

Handling and using special paper

The machine is designed to work well with most types of xerographic and bond paper. However, some paper variables may have an effect on print quality or handling reliability. Always test samples of paper before purchasing to ensure desirable performance. Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.

Some important guidelines when selecting paper are:

„Do not use inkjet paper because it may cause a paper jam or damage your machine.

„Preprinted paper must use ink that can withstand the temperature of the machine’s fusing process (200 degrees centigrade).

„If you use bond paper, paper having a rough surface or paper that is wrinkled or creased, the paper may exhibit degraded performance.

17