
Copy options (temporary settings)
When you want to quickly change the copy settings temporarily for the next copy, use the temporary Copy keys. You can use different combinations.
The machine returns to its default settings one minute after copying, unless you have set the Mode Timer to 30 seconds or less. (See Mode Timer on page 23.)
Enlarging or reducing the image copied
You can choose the following enlargement or reduction ratios:
Press | 100%* | ||
|
| 97% | LTRiA4 |
|
| ||
|
|
|
|
|
| 94% | A4iLTR |
|
|
|
|
|
| 91% | Full Page |
|
|
|
|
|
| 85% | LTRiEXE |
83%LGLiA4
78%LGLiLTR
70% A4iA5
50%
Auto
200%
141% A5iA4
104% EXEiLTR
*The factory setting is shown in Bold with an asterisk.
Auto sets the machine to calculate the reduction ratio that best fits the size of paper.
Auto is only available when using the ADF.
Making copies
To enlarge or reduce the next copy follow the instructions below:
a Make sure you are in Copy mode . b Load your document.
c Use the dial pad to enter the number of copies (up to 99).
d Press Enlarge/Reduce.
Press c.
e Do one of the following:
Press a or b to choose the enlargement or reduction ratio you want.
Press OK.
Press a or b to choose
Use the dial pad to enter an enlargement or reduction ratio from 25% to 400%. (For example, press 5 3 to enter 53%.)
Press OK.
f Press Start.
Note | 12 |
Page Layout Options 2 in 1(P), 2 in 1(L), 4 in 1(P) or 4 in 1(L) are not available with Enlarge/Reduce.
83