General information

 

Status LED indications

 

The Status LED (light emitting diode) will flash and change color depending on the machine’s

1

status.

LED

Machine Status

Description

 

Sleep Mode

The power switch is off or the machine is in Sleep mode.

 

 

 

 

 

 

Warming Up

The machine is warming up for printing.

Green

 

 

 

 

(blinking)

 

 

 

 

 

 

 

 

 

 

Ready

The machine is ready to print.

Green

 

 

 

 

 

 

 

 

 

 

Receiving Data

The machine is either receiving data from the computer,

 

 

processing data in memory, or printing data.

Yellow

 

 

 

 

(blinking)

 

 

 

 

 

 

 

 

 

 

Data Remaining

Print data remains in the machine memory.

Yellow

in Memory

 

 

 

 

 

 

 

 

 

 

 

 

 

Service error

Follow the steps below.

 

 

1. Turn off the power switch.

Red

 

2. Wait a few seconds, and then turn it back on and try to print

(blinking)

 

again.

 

 

If you cannot clear the error and you see the same service call

 

 

indication after turning the machine back on, please call Brother

 

 

Customer Service. (See Brother numbers on page i.)

 

 

 

 

 

 

Cover open

The front cover or fuser cover is open. Close the cover.

 

 

 

 

 

Red

Toner Life End

Replace the toner cartridge with a new one.

 

 

 

 

 

Paper error

Put paper in the tray or clear the paper jam. Check the LCD

 

 

message.

 

 

 

 

 

 

Scan lock

Check that the scanner lock lever is released.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Others

Check the LCD message.

Note

When the power switch is off or the machine is in Sleep mode, the LED is off.

9