13 - 2
TROUBLESHOOTING AND MAINTENANCE
6
Plug in the power cord.
7
Load the fax paper again, and push the blue release lever down. Close the cover.
The other party has disconnected during a call or
fax. Try calling the other party.
The documents were not inserted or fed properly,
or were too long or too short.
1
Open the cover.
2
Pull the documents toward the front of the fax machine, in the same direction they
were feeding.
3
Close the cover.
Contact your Brother Dealer for service,
The number you called does not answer or is
busy. You may also have reached a number not
connected to a fax. Check the number and call
again.
You’ve tried accessing a One Touch or Speed
Dial location with no number assigned to it. See
chapter 7 for information about storing One
Touch and Speed Dial numbers.
The paper roll is empty; follow the instructions in
Installation to replace the paper roll.
DISCONNECTED
CHECK DOCUMENT
REMOVE DOCUMENT
CHECK DOCUMENT
PRESS STOP KEY
Front cover
CALL BROTHER CS
MACHINE ERROR XX
NO RESPONSE/BUSY
NOT REGISTERED
PAPER ROLL EMPTY
RELOAD PAPER