Brother FAX 770 Alternating Displays, Function Selection Table, FAX NO. & Start Copy Press Copy

22 C H A P T E R T H R E E

Alternating Displays

When you see alternating displays, the LCD sometimes alternates between the currently selected option, and a help message giving brief instructions about how to proceed. The display you’ll probably see most often is shown below, showing you, when you place a document in the feeder, that you can dial a number and send a fax, or you can make a copy.

FAX: NO. & START

COPY: PRESS COPY

Function Selection Table

If you have a basic understanding of how to program your FAX/MFC, you can perform most of the programming settings without the Owner’s Manual. To help you understand the function selections, options, and settings that are found in your fax programs, use the Function Selection Table below.

1. INITIAL SETUP
Function	Description	Factory Set			More Info
1. TONE/PULSE	Selects dialing mode.	TONE			p. 27
2. DATE/TIME	Enter date and time for LCD	1999 1/1 00:00			pp. 27, 28
	display and to print on
	transmissions.
3. STATION ID	Program name, fax number and	—		p. 28
	telephone number to appear on
	each transmitted page.
4. BEEPER	Adjust volume level of beeper.	LOW			p. 30
2. SETUP RECEIVE
Function	Description	Factory Set			More Info
1. RING DELAY	Number of rings before FAX/MFC	RING DELAY: 04			pp. 35, 85
	answers in FAX/TEL, FAX, or
	MC (FAX 870MC and MFC	TOLLSAVER:OFF
	970MC only) modes.	(FAX 870MC and
		MFC 970MC only)
2. F/T RING TIME	Sets the time for “double ring” in	20			p. 35
	FAX/TEL mode.
3. EASY RECEIVE	Receive fax messages without	O N			p. 36
	pressing the Start key.
4. REMOTE CODE	Enter code to activate or deactivate	ON (	51, #51)		p. 40
	machine from a remote location.