Brother MFC 970MC, FAX 770, FAX 870MC Changing One Touch Speed Dial Numbers, CHANGE- OR- 2. Exit

NAME:

ENTER

#05:

& SET

S E T U P A U T O D I A L N U M B E R S 65

3Press Set . The screen displays your entry, then prompts you to enter the number you’re storing.

4Enter the number (up to 20 digits).

5Press Set . The screen now prompts you to store a name with this number.

6Use the dial pad to enter the name (up to 15 characters). You can use the chart on page 29 to help you enter letters— OR—Go to Step 7 to store the number without a name.

7Press Set .

8The screen prompts you to select the type of number this is. Use or to select the type you want.

FAX a fax number

TEL a telephone (voice) number FAX/TEL both a fax and telephone number

CHAIN a number (usually an access code) for chain dialing

9Press Set .

10 Return to Step 2 to store another Speed Dial number— OR—Press Stop to exit.

Changing One Touch and

Speed Dial Numbers

If you try to store a One Touch or Speed Dial number in a location where a number is already stored, the screen displays the current name stored there, then prompts you to either

1.CHANGE— OR— 2. EXIT.

1Press 1 to change the number stored, or press 2 to exit without making a change.

2Enter a new number.

■If you want to erase the whole number, press Stop when the cursor is to the left of the digits. The letters above and to the right of the cursor are deleted.

■If you want to change a digit, use or to position the cursor under the digit you want to change, then type over it.

3Follow the directions from Step 4 in Storing One Touch Numbers or Step 5 in Storing Speed Dial Numbers.