Error Message

Cause

Action

 

Out of Fax Memory

The fax memory is full.

Do one of the following:

 

 

 

Clear the data from the memory.

 

 

 

To gain extra memory, you can

 

 

 

turn off Memory Receive.

 

 

 

(See Advanced User’s Guide:

 

 

 

Turning off Memory Receive

 

 

 

operations.)

 

 

 

Print the faxes that are in the

 

 

 

memory. (See Advanced User’s

 

 

 

Guide: Printing a fax from the

 

 

 

memory.)

 

 

 

 

 

 

Out of Memory

The machine's memory is full.

If a fax-sending or copy operation

 

 

 

is in process:

 

 

 

 

 

 

 

 

Press

 

and wait until the other

 

 

 

operations

in process finish, and

 

 

 

then try again.

 

 

 

Press OK to send the pages

 

 

 

scanned so far.

 

 

 

Press OK to copy the pages

 

 

 

scanned so far.

 

 

 

Clear the data in the memory. To

 

 

 

gain extra memory, you can turn

 

 

 

off Memory Receive.

 

 

 

(See Advanced User’s Guide:

 

 

 

Turning off Memory Receive

 

 

 

operations.)

 

 

 

Print the faxes that are in the

 

 

 

memory. (See Advanced User’s

 

 

 

Guide: Printing a fax from the

 

 

 

memory.)

 

 

 

 

 

 

Paper Jam [Front]

The paper is jammed in the machine.

Remove the jammed paper. (See

 

 

 

Printer jam or paper jam on page 75.)

 

 

 

Make sure the paper length guide is

 

 

 

set to the correct paper size. DO NOT

 

 

 

extend the paper tray when you load

 

 

 

A5 or smaller size paper.

 

 

 

 

 

 

 

 

If there is a repeat paper jam, a small

 

 

 

piece of paper may be stuck in the

 

 

 

machine. Make sure paper is not still

 

 

 

jammed in the machine. (See

 

 

 

Additional paper jam clear operations

 

 

 

on page 79.)

 

 

 

 

 

 

 

70