8 Making copies
How to copy
The following steps show the basic copy operation. For details about each option, see Advanced User's Guide.
a When you want to make a copy, press 
(COPY) to illuminate it in blue.
Make sure you are in Copy mode.
c Press Black Start or Color Start.
Note
If the LCD shows Please Wait and the machine stops copying while you are making multiple copies, please wait for 30 to 40 seconds until the machine finishes the color registrations and cleaning process of the belt unit.
Stop copying
To stop copying, press Stop/Exit.
The LCD shows:
Copy | Favorite |
Enlarge/
QualityDuplex Copy
Reduce
Auto | 100% | Off |
You can enter the number of copies you want by pressing the + and - buttons on the Touchscreen.
Note
The default setting is Fax mode. You can change the amount of time that the machine stays in Copy mode after the last copy operation. (See Mode Timer in Chapter 1 of the Advanced User's Guide.)
b Do one of the following to load your document:
Place the document face up in the ADF. (See Using the automatic document feeder (ADF) on page 26.)
Load your document face down on the scanner glass. (See Using the scanner glass on page 27.)
Copy settings
Press COPY and then press d or c to choose the setting you want. For details about
changing the copy settings, see Copy 8 settings in Chapter 7 of the Advanced User's Guide.
You can change the following copy settings:
Quality
Enlarge/Reduce
Duplex Copy
Tray Use
Brightness
Contrast
Stack/Sort
Page Layout
2in1(ID) (Page Layout)
Color Adjust (Saturation)
Set New Default
Factory Reset
Favorite Settings
53