1
CONNAITRESA CONOZCASU KNOWINGYOUR MACHINECOUDRE MÁQUINACOSER MACHINESEWING A DE | 4 | 2 |
3 |
| |
5 |
|
A1
B
C
1
2
D
2
E
3
25
Upper Threading
1.Raise the presser foot using the Presser Foot Lever. (Fig. A)
2.Raise the needle to its highest position by turning the handwheel toward you (counterclockwise). (This step will raise the thread
1 Presser foot lever
3.Place a spool of thread on the horizontal spool pin with the thread coming from the bottom front of the spool. Press a spool cap onto the spool pin to hold the thread spool firmly in place. (Fig. B)
The thread end should come from the bottom front of the spool.
CAUTION
•If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin and cause the needle to break.
•Use the spool cap (large, medium, or small) that is closest in size to the thread spool. If a spool cap smaller than the thread spool is used, the thread may become caught in the slit on the end of the spool and cause the needle to break.
CAUTION
Be sure to thread the machine properly. Improper threading can cause the thread to tangle and break the needle, leading to injury.
4.Pass thread through upper thread path. (Fig. C)
5.Make sure to guide the thread through the thread
2Thread
6.Place thread behind the guide on the needle clamp above the needle (Fig. E) through the opening on the right of the guide.
3Needle clamp
NOTE:
If the thread
Incorrectly feeding the thread may cause sewing problems.