Brother XL-6062, XL-6053, XL-6050, XL-6060, XL-6041, XL-6042 Various Controls, Pattern Selection Dial

CONOSCERE LACONOZCA SUKNOWING YOUR MACCHINAM ÁQUINASEWING

DA CUCIREDE COSERMACHINE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

XL-6060

XL-6061

XL-6062

XL-606320 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

3

1

2

3

·	3	·	2	·	1
					F
4

3

SS

VARIOUS CONTROLS

Pattern Selection Dial

CAUTION

When you use the Pattern Selection Dial to select a pattern, turn the balance wheel to the front (counter-clockwise) by hand to set the needle in the highest position before selecting the pattern. If the needle is in the down position when the Pattern Selection Dial is turned, the needle, presser foot, or fabric may be damaged.

To select a stitch, simply turn the Pattern Selection Dial, located on the right side of the machine. The Pattern Selection Dial may be turned in either direction. The recommended lengths and the preset widths for each stitch are shown on the following page.

1Pattern selection dial

2 Pattern number

The stitches that are available depend on the Stitch Length Dial setting. If the Stitch Length Dial is set between 0 and 4, any of the stitches in the top row can be selected. If the Stitch Length Dial is set to SS, any of the stitches in the bottom row can be selected.

3Stitch length dial

(Model XL-6060, XL-6061, XL-6062, XL-6063, XL-6050, XL- 6051, XL-6052, XL-6053)

NOTE:

Since the Pattern Selection Dial is not a continuous dial, it cannot be turned directly from the last stitch to the first one or from the first stitch to the last one. To select the first stitch when the last one is displayed or to select the last stitch when the first one is displayed, turn the Pattern Selection Dial in the opposite direction until the desired stitch is displayed.

13