Brother XL-6051, XL-6053, XL-6050, XL-6060, XL-6062, XL-6041, XL-6042, XL-6061, XL-6043 Maintenance

FABRIC DOES	NEEDLE	MACHINE IS	MACHINE DOES
NOT FEED
	BREAKS	NOISY OR SLOW	NOT START
PROPERLY

Stitch Length Dial is	Needle is not	Lint is clinging to the	Power supply plug is
set at no feeding.		bottom of the needle
	correctly inserted.		removed from outlet.
("0")		plate.

		No			No
Page 24			Page 9			Page 79
The combination of			Inferior needle is
needle size/thread
size/fabric is				used.
	incorrect.
Page 39		No	Page 9		No
			The combination of
Inferior needle is			needle size/thread
	used.		size/fabric is
				incorrect.

No		No
	Page 5

Main power switch

is turned off.

Page 7 No

The bobbin winder shaft is slid to the right.

MAINTENANCE MANTENIMIENTO MANUTENZIONE

Page 9 No

Thread is tangled.

Page 33 No

(Not available on models

XL-6040, XL-6041,

XL-6042, and XL-6043)

The buttonhole lever is pushed toward the back of the machine.

Page 55 No

Page 39 No

Fabric is pulled

excessively. Let the feed dogs move the fabric. Do not pull the fabric.

No

Page 29 No

Foot controller is not

used correctly.

Page 8 No

CONTACT YOUR LOCAL SERVICE CENTER

82