60Help

BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672

60Help

If the power fails

One-touch and speed dial directories are saved.

Documents stored in the memory as well as the date and time are not saved.

Printing stops before the job is finished

Check that the paper is not jammed.

Check that the front cover is fully closed.

Have you run out of paper? If receiving a fax, your machine can store up to 19 pages in its memory for printing later.

Cannot send a fax

There may be interference on the line.

Try sending the fax at a slower speed, see page 53.

There may have been an error or a problem with the receiving machine. Check the display for an error message. See Error Messages, page 54.

Reception in memory

If you place a document to be faxed or copied in the automatic feeder while receiving a document, printing of the received document stops and it will be stored in the memory for printing later. During reception the display shows

RX IN MEMORY.

Remove the document from the feeder to print the fax in memory.

Machine does not come on

Check that you have plugged it into the mains and that the power is switched on.

Document does not load

Check that it is an acceptable size and type of paper, see page 17.

Page 60
Image 60
BT BT PaperJet 35 manual Help