BT BT PaperJet 35 manual Security code, repeatedly to display REC. FORW. ANNOUNC

BT PaperJet 35 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672

42	Using the answering machine
			Record a new Forwarding message
	1.		Press	until the display shows TAD SET-UP.
	2.		Press	then	repeatedly to display REC. FORW. ANNOUNC.
	3.		Press	. The display shows LIFT HANDSET.
	4.		Lift the handset and the display shows <I> TO RECORD.
	5.		Press	to begin recording. Speak your message into the handset.
			The display counts down the time available.
	6.		Hang up the handset to end recording, the message is replayed.
			Press	to return to standby.
		The security code is also your answering	Security code
		machine’s remote access code which is used	Use your security code to prevent unauthorised users from playing
		to access your messages from another
		phone. See page 43.	messages or changing your answering machine settings. The default
			code is 1234. You can change this.

Change code

1.Press repeatedly until the display shows TAD SET-UP.

2.Press then repeatedly until the display shows ACCESS CODE.

3.Press . The display shows TYPE CODE (0-9) 1234.

4.Enter the new 4-digit code you want. If you make a mistake, press to delete the digits.

5.Press . Display shows PLAY UNLOCK.

6.Press to return to standby.